20ton Capacity Easy Use SS316L Material Inclined Screw Conveyor
I. Overview.
Screw conveyor is a kind of machinery that uses a motor to drive
spiral rotation and push materials to achieve the purpose of
conveying. It can be transported horizontally, obliquely or
vertically, and has the advantages of simple structure, small
cross-sectional area, good sealing, convenient operation, easy
maintenance, and convenient closed transportation.
II. Working principle and Applictaion
When the material enters the fixed tank, due to the gravity of the
material and the friction between the material and the tank, the
material accumulated in the lower part of the tank continuously
rotates with the spiral body, and moves forward under the push of
the rotating spiral blade.
Screw conveyors are suitable for various industries, such as
building materials, chemical industry, electric power, metallurgy,
coal, food and other industries, and are suitable for horizontal or
inclined conveying powder, granular and small lump materials, such
as coal, ash, slag, cement, grain, etc. , The material temperature
is less than 200℃. The screw machine is not suitable for conveying
materials that are perishable, viscous, and easily agglomerated.
III.Characteristics are below
1. Large carrying capacity, safety and reliability.
2. Strong adaptability, convenient installation and maintenance,
and long life.
3. The whole machine is small in size and high in speed, ensuring
fast and uniform delivery.
4. The discharge end is equipped with a cleaning device, the whole
machine has low noise, strong adaptability, and flexible layout of
the inlet and outlet positions.
5. Good airtightness, the shell is made of seamless steel pipes,
and the ends are connected by flanges to form a whole, with good
rigidity.
IV. Technical parameter
| Model | Diameter mm | Pitch mm | Speed r/min | Standard Capacity(m3/h) | Speed r/min | Standard Capacity(m3/h) | Speed r/min | Standard Capacity(m3/h) |
| φ0.45 | φ0.33 | φ0.15 | φ0.45 | φ0.33 | φ0.15 | φ0.45 | φ0.33 | φ0.15 |
| LS20 | 200 | 200 | 100 | 16.9 | 12.4 | 5.6 | 80 | 13.5 | 9.9 | 4.5 | 63 | 10.7 | 7.8 | 3.6 |
| LS315 | 315 | 315 | 80 | 52.9 | 38.8 | 17.6 | 63 | 41.6 | 30.5 | 13.9 | 50 | 33.1 | 24.2 | 11 |
| LS400 | 400 | 355 | 71 | 85.3 | 62.5 | 28.4 | 56 | 67.3 | 49.3 | 22.4 | 45 | 54.1 | 39.6 | 18 |
| LS500 | 500 | 400 | 63 | 133.2 | 97.7 | 44.4 | 50 | 105.8 | 77.6 | 35.3 | 40 | 84.6 | 62.0 | 28.2 |
Ⅴ.Selection Conditions of Trough Auger Conveyor
| Material to be processed: _____ | Working environment is indoor or outdoor:________ |
| Handling capacity: ________per hour | Working environment temperature: _______ ℃ |
| Bulk Density: _____t/m3 | Installation form is horizontal or inclined : ________ |
| Conveying distance: ________ | If it is inclined,what is the inclined degree_____° |
| Material size:____mm | Water content:____% |
| Material temperature: _______ ℃ | Working power supply: _____V ______HZ ______PH |
VI.Equipment installation requirements
a. The on-site installation of the inlet and outlet should make the
flange support surface of the inlet and outlet parallel to the axis
of the screw machine; the flanges connected to it should be tightly
fitted and there should be no gaps.
b. After the screw machine is installed, check whether there is
enough lubricating oil in each oil storage place, if not enough,
add enough, and then carry out a no-load test run; check the screw
machine after running for more than 4 consecutive hours. Accuracy
of assembly: Stop immediately when an abnormality is found, and
operate after treatment until it is in a good operating state.
c. The operation of the screw machine should be stable and
reliable, and the fasteners should not be loosened. The reducer has
no oil leakage, no abnormal sound, electrical equipment is safe and
reliable, and the no-load operating power is less than 30% of the
rated power.
